Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire HP Single Phase Split System Multi Stg 2 Ton 36k BTU AHU 16.5 SEER2

Arcoaire HP Single Phase Split System Multi Stg 2 Ton 36k BTU AHU 16.5 SEER2
Kit Includes whip 6' 3/4" 6GA, No Vent Caps, 3" Plastic Pad, Surge Protector, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, PVC Trap Kit, Furnace Leveler, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire HP Single Phase Split System Multi Stg 2 Ton 36k BTU AHU 16.5 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Includes:
DLCURAH24AAK, FVM4X3600BL, HPKIT40
Nominal Capacity (BTUH):
24000
Cooling Efficiency (EER2):
9.5
Cooling Efficiency (SEER2):
16.5
Heating Efficiency HSPF2:
8.1
System Indoor Type:
AHU
System Outdoor Type:
Multi Stage
System Coil Configuration:
Multi Position
System AHU Type:
Variable Speed
System Nominal Tons:
2
AHRI System Number:
211641018
Heat Pump, Single Phase, Split AHU Multi Stage, Multi Position DLCURAH/FVM4X

Heat Pump Inverter
  • Utilize expansion device on the indoor unit
  • Insulate suction line only
  • Anti corrosion coating
  • Built in algorithm learns and adapts
  • Monitors suction pressure/temperature (super heat) to regulatecompressor speed
  • Field adjustable timer (ramps up to 100% if thermostat not satisfied)
  • Automatically ramps up/down 30-120% rated capacity
  • Field set sw 1-3 to A/C only
  • Low ambient cooling to -22°F
  • Pre charged for 25' tubing
Multi Position Fan Coil
  • Factory installed TXV metering device
  • Variable Speed EC motor
  • Supports 2 Stage Outdoor Units
  • Dehumidification Mode
  • Heat Pump Comfort/Efficiency Options
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • Multi position installation - up flow or horizontal left standard
  • Horizontal right with minor modification
  • Field convertible to down flow with accessory kit
  • HUD approved for manufactured housing BUILT TO LAST
  • Primary and secondary drain fittings with brass inserts
  • 1 inch thick insulation with R value of 4.2
  • Field installed heater packages from 5 kW - 30 kW available